Confirming component association

When you are building a BOM and its built items and components are traceable, the Confirm Component Association window appears. Use this window to match traceable components to traceable built items.

Note: Full component traceability is chosen by selecting the Component association required box on the BOM record Details tab.

To confirm component association

1. Select the Stock Code/Identification No. in the Traceable Assemblies and Components list.
2. Click to expand the Code and display the components.

3. Select a component.

   All traceable numbers for the component are listed in lower part of the window.

4. Enter the serial/batch details for each component in each assembly:

   If the item is batch traceable

   1. Select a Batch No by selecting the required check box.
   2. Enter the amount in the Quantity column.

   Note: The total stock quantity entered must be the same as the amount specified in the Quantity required box.

   If the item is serial traceable

   • Select the Serial No by selecting the required check box.

   Note: You must select the same amount as that specified in the Quantity required box.

   Note: The items selected must match the Quantity for the traceable assembly.

5. Click OK.